1. Clean the surface: The surface to be pasted must be clean, dry and flat. Remove dirt and grease with a soft cloth.
2. Measure and cut: Measure the size to be pasted, then use a ruler and a knife to cut and paste the base to the desired size.
3. Peel off the protective layer: Gently peel off the protective film behind the base sticker.
4. Paste: Place the base sticker on the surface to be glued, align it carefully and then slowly smooth it to make the base stick firmly.
5. Treat bubbles: If air bubbles appear, use a sewing needle to gently poke the bubble and then flatten it.
6. Finishing: Wipe the sole surface with a soft cloth.

Note:
- To achieve the best results, you should use specialized glue for PVC plastic.
- Avoid applying on wet or cracked surfaces.
- When cutting and pasting the base, leave a little extra for easy adjustment.

Protect

Smooth leather; Suede, Nubuck leather;; Canvas; Patent leather; Oiled leather; Nappa leather; Veg leather; Cordovan leather; Metallic leather; Reptile leather; Synthetic leather; Rubber

Shoes