1. Surface preparation:
- The surface to be pasted must be clean, dry and smooth. If the surface is dirty or greasy, wipe it clean with a soft cloth.
2. Collage:
- Cut: Use scissors to cut and paste the base to the desired size.
- Paste: Peel off the protective paper behind the base sticker, then gently place the base sticker on the surface to be pasted.
- Rub: Use your hands or a roller to rub evenly to adhere the sole firmly to the surface.
3. Flatten: Use a hard, flat object (such as an ATM card) to gently rub the base sticker surface to remove air bubbles and make the base sticker smooth and flat.

Note:
- Temperature: Should be pasted at room temperature, avoid pasting in places with too high or too low temperatures.
- Pressure: When pasting, do not use too much force, it may tear the base sticker.
- Storage: Store the base paste in a cool, dry place, away from direct sunlight.

Protect

Smooth leather; Suede, Nubuck leather;; Canvas; Patent leather; Oiled leather; Nappa leather; Veg leather; Cordovan leather; Metallic leather; Reptile leather; Synthetic leather; Rubber

Shoes