USE:
1. Connect the gun to the air compressor.
2. Pour the paint into the gun cup, after diluting it moderately.
3. Hold the airbrush in your hand. Press the joystick and air begins to escape. Then, gradually pull the lever back to spray (distance from the surface 15-20cm). Adjust the injector with the knob on the back of the gun to get the desired amount of paint.
4. After finishing painting, pour out all the paint and clean the gun with water and a special brush.
MAINTENANCE:
1. Spray all the paint out and pour water into the gun cup.
2. Use your finger to block the needle cap and spray.
3. Let the air flow back up the nozzle to clean away paint residue. Lift your finger out and remove all the water inside the gun cup.
4. Repeat this process several times until there is no more paint residue inside the paint spray gun.
5. Keep the nozzle and nozzle cap clean. Any dirt will reduce spray effectiveness.
6. Remove the needle and clean off the remaining paint. Do not bend or damage the surface of the needle, as this may interfere with the use of the paint spray gun.
Protect
Smooth leather; Patent leather; Nappa leather; Synthetic leather; Rubber
Shoes; Clothes; Bag; Furniture; Car Furniture
With 0.5 mm nozzle diameter and 7 ml/ 0.25 fl.oz color cup capacity.
Take gas from the air compressor to combine with the gun
Used for spraying colors, dyes, and protection. TNV040000000A
Paint gun
USE:
1. Connect the gun to the air compressor.
2. Pour the paint into the gun cup, after diluting it moderately.
3. Hold the airbrush in your hand. Press the joystick and air begins to escape. Then, gradually pull the lever back to spray (distance from the surface 15-20cm). Adjust the injector with the knob on the back of the gun to get the desired amount of paint.
4. After finishing painting, pour out all the paint and clean the gun with water and a special brush.
MAINTENANCE:
1. Spray all the paint out and pour water into the gun cup.
2. Use your finger to block the needle cap and spray.
3. Let the air flow back up the nozzle to clean away paint residue. Lift your finger out and remove all the water inside the gun cup.
4. Repeat this process several times until there is no more paint residue inside the paint spray gun.
5. Keep the nozzle and nozzle cap clean. Any dirt will reduce spray effectiveness.
6. Remove the needle and clean off the remaining paint. Do not bend or damage the surface of the needle, as this may interfere with the use of the paint spray gun.
Protect
Smooth leather; Patent leather; Nappa leather; Synthetic leather; Rubber
Shoes; Clothes; Bag; Furniture; Car Furniture
